Sign In | Join Free | My enlightcorp.com
China KFWELD Electrical Technology Co., LTD logo
KFWELD Electrical Technology Co., LTD
Site Member

8 Years

Home > Exothermic Welding Material >

Exothermic Welding Mould, Graphite Mold, for Grounding Connection

KFWELD Electrical Technology Co., LTD

Exothermic Welding Mould, Graphite Mold, for Grounding Connection

Place of Origin : China

Brand Name : KFWELD

Certification : CE, ISO9001, UL, SGS

MOQ : 1 set

Price : USD 1-45 per set

Payment Terms : T/T, Western Union, MoneyGram, Paypal

Supply Ability : 1000000 set per month

Delivery Time : 3-5 working days

Packaging Details : bubble bag+carton

Type : Exothermic Welding Mould

Certificate : CE, ISO9001, UL, SGS

Application : Grounding&Lightning Protection

Contact Now

Exothermic welding introduction:
Exothermic welding in under the high temperature caused by the aluminothermy reaction to realize the high quality weld connection. This aluminothermy reaction is carried out in the high temperature resistant graphite CAD weld mold. In normal conditions, more than 100 points can be welded with same mould and the reaction will spend about 5-6 seconds only.

Exothermic Welding Mould, Graphite Mold, for Grounding ConnectionExothermic Welding Mould, Graphite Mold, for Grounding Connection

Exothermic welding powder specification:

Part No. Specification Part No. Specification
KFWELD65 65#,65gram KFWELD200 200#,200gram
KFWELD90 90#,90gram KFWELD250 250#,250gram
KFWELD115 115#,115gram KFWELD300 300#,300gram
KFWELD150 150#,150gram KFWELD350 350#,350gram

This series of products include exothermic welding moulds, mould Handle clamp, exothermic welding powder and supporting operation tool kit.

Exothermic Welding Mould, Graphite Mold, for Grounding Connection

Operation process:

Exothermic welding operation process:
1. Clean the joint of the mold and the welded conductor and place the welded conductor at the central position of the mold cavity;
2. Close the mold and arrange a metal protective ring at the bottom of the mold smelting furnace;
3. Pour in the hot fusion welding and spray pyrophoric powder on the surface, to the mold mouth, of the flux;
4. Cover the mould cover and ignite the pyrophoric powder at the mould mouth by using a burning torch;
5. The hot fusion melting flux is subjected to high temperature reaction in the mould after being ignited;
6. Open the mould after natural cooling when the reaction is finished.

Matters Needing Attention:
1. Unrelated person should not stay within 1.5 meters away from the operation site during construction.
2. Inflammable goods should not be placed within 1.5 meters away from the operation site during construction.
3. The operating personnel must put on heat-resisting working gloves.
4.The operating staff should not perform construction in front of the mouth of melted mold.
5. The operating staff should be at least 1.5 meters away from the melted mould immediately once the pyrophoric powder is ignited.
6. No one could contact the melted module directly after fusion welding is finished.
7. The melted module and the welded wire are cooled for 30 seconds after fusion welding is finished and then taken out by using a pincer.
8. Welded wire is subjected to insulation treatment only when the wire is completely cooled.

Exothermic Welding Mould, Graphite Mold, for Grounding Connection

Exothermic welding type:

Bar to bar, bar to ground rod, bar to steel surface, cable tp bar, cable to cable, cable to ground rod, cable to re-bar, cable to steel surface, cable to rail, bolt to steel surface, one-joint.

Exothermic Welding Mould, Graphite Mold, for Grounding ConnectionExothermic Welding Mould, Graphite Mold, for Grounding Connection

Exothermic welding feature:
1. Current carrying capability from welding point is same as conductor with good conducting performance. After inspection, the DC resistance ratio and change rate are almost zero before and after welding. This is the level that any of the traditional welding method cannot be compared.
2. No need of resources from outside. It can be operated indoor and outdoor.
3. It won't be damaged by surge current. The test shows the conductor will be melted earlier than welding points when under high current impact in short period.
4. Corrosion or slack will not be produced from welding. As it is weld junction,no contact surface, no residual stress, junction is stable and reliable as long term conductive body.
5. As it is welding junction, connector and conductor are combined on molecular.So it has a good mechanical strength and is a permanent junction.
6. Equipment is simple, convenient and handy. The operation is easy and can be done.

FAQ:

How about the order process?

1. Customers send inquiry to us, our sales will make professional quotation.
2. Confirm the price, quantity, shipping cost, delivery time, payment term etc.
3. Confirm the above, our sales make proforma invoice.
4. Customers make payment and send bank slip to us, we prepare order.
5. Payment arrive in our account, we will arrange delivery immediately.
6. After delivery, we will send tracking or B/L to customers. our service team will follow order tracking until customers receive.
7. Order can be say “finish” when you receive the goods and satisfy with them .
10. Feedback to our about Quality , Service, Market Feedback & Suggestion, then we can do better!

Contact:

KFWELD Electrical Technology Co., LTD

Miss Summer

TEL: 86-21-34977237
FAX: 86-21-34110771
MOB:
86-13917179469

Email: summer@shkfweld.com sales@shkfweld.com admin@shkfweld.com
QQ: 1441294061
Skype: lkq
f1985

WeChat: lkqf214

Website: www.shkfweld.com


Product Tags:

Exothermic Welding Mould

      

Exothermic Welding Powder

      

exothermic welding

      
Quality Exothermic Welding Mould, Graphite Mold, for Grounding Connection for sale

Exothermic Welding Mould, Graphite Mold, for Grounding Connection Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: KFWELD Electrical Technology Co., LTD
*Subject:
*Message:
Characters Remaining: (0/3000)